Flue Liners for Masonry Chimneys North Tonawanda NY

Building codes require that residential masonry chimneys in North Tonawanda with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Ajax Smith, Inc.
716 877-1126
4000 River Rd.
Tonawanda, NY
Mauser John J
(631) 395-7231
26 Floyd Rd N
Shirley, NY
Segundo Guaman Genl Contractors
(914) 736-1571
1452 Riverview Ave
Peekskill, NY
Signature Stone
(631) 289-5258
205 Peconic Ave
Medford, NY
Mjc Mason Contracting Inc
(914) 739-1316
42 Fowler Ave
Cortlandt Manor, NY
E J Militello Concrete Inc
(716) 636-2288
6465 Transit Rd
East Amherst, NY
DM Padovano Construction
716 553-7447
320 Irvington Dr
Tonawanda, NY
Dana Restorations Inc
(718) 931-7200
3073 Buhre Ave Apt 1F
Bronx, NY
Bricks & Stones Masonry
(518) 799-2317

Stuyvesant Falls, NY
Bradley John General Contractor
(607) 432-7908
164 Moffre Rd
Maryland, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles