Flue Liners for Masonry Chimneys Mount Kisco NY

Building codes require that residential masonry chimneys in Mount Kisco with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Water Control Systems
(315) 789-5600
414 Border City Rd
Geneva, NY
Mjr Stoneworks
(518) 329-5595

Ancramdale, NY
Austin Don Masonry
(315) 592-5278
54 Wood Ridge Ln
Fulton, NY
Will & Will General Contractors
(716) 433-4304
6035 S Transit Rd
Lockport, NY
Long Island Pool Scapes
(631) 698-8873
2 Avalon Ct
Ronkonkoma, NY
Nick Larizza Masonry Inc
(914) 242-0693
53 Kisco Park Dr
Mount Kisco, NY
Donovan Restoration Inc
(518) 664-2171
67 Hudson Ave
Stillwater, NY
Arcade Contracting & Restoration Inc
(718) 596-4030
615 Degraw St
Brooklyn, NY
Nethercott P W Inc
(914) 939-2383
433 W William St
Port Chester, NY
Heady Kenneth Contractor
(845) 226-8589
Cottontail Ln
Hopewell Junction, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- How Masonry Buildings Resist Earthquakes Mount Kisco NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Galvanized Wall Ties Mount Kisco NY
- Galvanized Wall Ties Mount Kisco NY
- Inner Corner at Base of Wall Mount Kisco NY
- Grout Pumps Mount Kisco NY
- Flashing Factors Mount Kisco NY
- High Cement Content Problems Mount Kisco NY
- Hand-Held Power Saws Mount Kisco NY
- Improving Company Loyalty Mount Kisco NY
- Flashing at Sills Mount Kisco NY