Flue Liners for Masonry Chimneys Monroe NY

Building codes require that residential masonry chimneys in Monroe with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Jay Masonry Co
(518) 273-8461
218 Hillcrest Ave
Troy, NY
East End Stone Works
(631) 269-2990
140 Old Northport Rd
Kings Park, NY
Stewart Masonary
(518) 762-2552
1719 State Highway 67
Johnstown, NY
K C Masonry Inc
(315) 253-5007
265 Genesee St
Auburn, NY
Quality Masonry & Development
(315) 593-7044
2036 County Route 176
Fulton, NY
A Maniaci Joseph & Son
(845) 783-8348
9 Cedar Rd
Monroe, NY
C & B General Contracting
(718) 863-3091
1550 Saint Peters Ave
Bronx, NY
ASA Contractors Inc
(585) 548-2235
5884 Merrill Rd
Byron, NY
Stonelove Masonry
(585) 256-1800
1080 South Ave
Rochester, NY
And 2
(631) 841-3234
500 Marconi Blvd
Copiague, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Monroe NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Inner Corner at Base of Wall Monroe NY
- Flashing Factors Monroe NY
- High Cement Content Problems Monroe NY
- Galvanized Wall Ties Monroe NY
- Grout Pumps Monroe NY
- How Masonry Buildings Resist Earthquakes Monroe NY
- Galvanized Wall Ties Monroe NY
- Improving Company Loyalty Monroe NY
- Hand-Held Power Saws Monroe NY