Flue Liners for Masonry Chimneys Fairport NY

Building codes require that residential masonry chimneys in Fairport with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Green Lawn Garden Center
(914) 682-4848
454 Ridgeway
White Plains, NY
Pcc Contracting Inc
(518) 785-8000

Albany, NY
Luis Mason Contractor Ltd
(914) 476-0550
406 Saw Mill River Rd
Yonkers, NY
Manley Construction Corp
(718) 389-5365
300 Eckford St
Brooklyn, NY
Ml Stumpf Contractng
(631) 580-0078
21 Wade Dr
Lake Grove, NY
ADS Masonry
585-698-0756
1900 university ave
rochester, NY
Darius Masonry Inc
(631) 841-3234
500 Marconi Blvd
Copiague, NY
Fladd's Creative Store
(585) 554-3066
322 Gray Rd
Rushville, NY
Ridge Paving Inc
(914) 234-6567
31 Bedford Banksville R
Bedford, NY
Moe Masonry Inc
(631) 287-4887
100 Sandy Hollow Rd
Southampton, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Fairport NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Grout Pumps Fairport NY
- High Cement Content Problems Fairport NY
- Inner Corner at Base of Wall Fairport NY
- Flashing Factors Fairport NY
- Improving Company Loyalty Fairport NY
- Hand-Held Power Saws Fairport NY
- Galvanized Wall Ties Fairport NY
- How Masonry Buildings Resist Earthquakes Fairport NY
- Galvanized Wall Ties Fairport NY