Flue Liners for Masonry Chimneys Corning NY

Building codes require that residential masonry chimneys in Corning with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.

Local Companies

Absolute Chimney Svce
(914) 949-1760
4 Broadway
Valhalla, NY
Abr Masonry Inc
(585) 352-4430
186 Ogden Center Rd
Spencerport, NY
Bullis Landscape
(845) 358-1142

Nyack, NY
Hull Construction and Restoration
(914) 220-0111
230 Ferris Ave
White Plains, NY
L M Construction
(631) 266-2928

Kings Park, NY
Rapid Masonry Restoration Inc
(212) 695-2170
38 W 32nd St
New York, NY
K T Constr Inc
(631) 673-1446
290 Pidgeon Hill Rd
Huntington Station, NY
Nicarro Land Development
(516) 338-2053
211 Drexel Ave
Westbury, NY
Calvary Construction Inc
(914) 663-6600
100 Oak St
Mount Vernon, NY
Westchester Paving & Sealing Co
(914) 667-7934
7 Wallace Ave
Mount Vernon, NY

Provided By:

Source: Masonry Construction
Publication date: September 1, 1989

By Nancy J. Marshall

Abstract: Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit. Chimneys usually are lined or relined with one of four types of liners: clay tile, cementitious precast, cast-in-place, or metal. Some proprietary systems are combinations of these systems.CLAY TILEClay tile is the most common way of lining residential chimneys. According to ASTM C 315, Standard Specification for Clay Flue Linings, clay tiles must be made of fire clay, shale, surface clay, or a combination of these materials.CEMENTITIOUS PRECAST LINERSOne proprietary precast flue liner is made of volcanic pumice aggregates and refractory cements. The sectional liners are about 2 feet long and come in 6-, 8-, and 10-inch inner diameters. A 2-inch space between the chimney and liners is filled with a proprietary mixture of expanded clay aggregates, portland cement, and water.CASTING LINERS IN PLACE WITH INFLATABLE FORMSOne way of casting liners is to lower a long inflatable rubber form into the flue, inflate it to the proper flue size, center it in the chimney with spacers, then fill the space between the form and the chimney with a cementitious mixture.

Click here to read full article from Masonry Construction

Related Articles
- How Masonry Buildings Resist Earthquakes Corning NY
Because masonry buildings usually have many structural wall elements, they tend to be stiff laterally. Because masonry buildings are stiff laterally, even moderate earthquakes can subject them to large shear loads at their base.
- Hand-Held Power Saws Corning NY
- Grout Pumps Corning NY
- Flashing Factors Corning NY
- Flashing at Sills Corning NY
- Improving Company Loyalty Corning NY
- High Cement Content Problems Corning NY
- Galvanized Wall Ties Corning NY
- Inner Corner at Base of Wall Corning NY
- Galvanized Wall Ties Corning NY