Flashing in Siding Installations Fredonia NY

A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.

Local Companies

Rodgers & Son Inc
(716)296-8065
7406 North Route 83
Cherry Creek, NY
Turftenders Lawn Care Inc
(716)662-4449
196 East Main Street
Fredonia, NY
R & R Landscaping
(716)753-2787
136 South Erie Street
Mayville, NY
Storer Excavating & Trucking
(716)595-3186
7534 Route 380
Stockton, NY
Don Lane
Lane TV & Satellite

716-962-9401
6073 - 6081 Route 380
Sinclairville, NY
Gugino Lawn & Garden
(716)549-1414
Brant Reservation Road
Brant, NY
Parker L W Enterprises Inc
(716)753-2300
County Farm Rd
Dewittville, NY
Nyberg Landscaping
(716)753-2918
4927 Potter Road
Mayville, NY
Quality Cleaning and Property Maintenance
(716)782-2001
1498 SWede Drive
Panama, NY
KUTZ John E Nursery
(716)326-3006
21 North Water Street
Westfield, NY

Provided By:

Source: REPLACEMENT CONTRACTOR Magazine
Publication date: November 1, 2005

By Carl Sperry

A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic:

Above door and window headers.

After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose. Flashing has to be intact to do its job, which is to keep water from contact with the wall. That goes for the weather barrier as well. Run the weather barrier over the flashing so that water doesn't get behind it. You want water to run over, not under, the siding.

Inside corners.

Tough and tricky, because sometimes your weather barrier gets torn trying to fit it into corners at a 90-degree angle. A simple fix for this is bending flashing in an L-shape before installing it in the corner. Then, after flashing is installed, run weather barrier over the flashing to eliminate the worry of tearing the paper and getting a leak.

Roofs and walls.

Another overlooked detail is where roofs intersect walls. Relying on step flashing alone is usually not enough.

Click here to read full article from Replacement Contractor

Related Articles
- Home Siding Tips Fredonia NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- Fan-Fold Foam Board Fredonia NY
- Exterior Siding Products Fredonia NY
- Inner Corner at Base of Wall Fredonia NY
- Flashing and Sill Products Fredonia NY
- Handling Siding Materials Fredonia NY
- Innovative Products for Home Remodeling Projects Fredonia NY
- Flashing at Sills Fredonia NY
- Flashing Factors Fredonia NY
- Growing Your Business Fredonia NY