Flashing in Siding Installations Centereach NY

A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.

Local Companies

Legacy Builders and Remodelers
1363-8 Lincoln Ave
Holbrook, NY
Green Trees Landscaping
(631)582-1036
128 Applegate Dr
Central Islip, NY
Delea L & Sons Sodding Farms
(631)368-8022
444 Elwood Road
East Northport, NY
Rose Lawn Maintenance
(631)957-4884
344 North Alleghany Avenue
Lindenhurst, NY
Ira Einhorn
Immaculate Tree service Associates, Inc.

631-424-7303
8 Pinoak Lane
Saint James, NY
Kuhn Construction, Inc
417 Main St
Islip, NY
B & A Lawn Sprinklers
(631)665-4545
1381 Saint Louis Avenue
Bay Shore, NY
PremiumMUlch & Matrials
(631)698-6323
482 Mill Rd
Coram, NY
Aliperti Lawn Maintenance & Masonry
(631)271-0413
215 Crombie Street
Huntington Station, NY
John Woodhouse
Pius Home Remodeling

631-839-3596
220 Elwood Road
East Northport, NY
Data Provided by:
  

Provided By:

Source: REPLACEMENT CONTRACTOR Magazine
Publication date: November 1, 2005

By Carl Sperry

A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic:

Above door and window headers.

After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose. Flashing has to be intact to do its job, which is to keep water from contact with the wall. That goes for the weather barrier as well. Run the weather barrier over the flashing so that water doesn't get behind it. You want water to run over, not under, the siding.

Inside corners.

Tough and tricky, because sometimes your weather barrier gets torn trying to fit it into corners at a 90-degree angle. A simple fix for this is bending flashing in an L-shape before installing it in the corner. Then, after flashing is installed, run weather barrier over the flashing to eliminate the worry of tearing the paper and getting a leak.

Roofs and walls.

Another overlooked detail is where roofs intersect walls. Relying on step flashing alone is usually not enough.

Click here to read full article from Replacement Contractor

Related Articles