Flashing at Sills Ozone Park NY

Sill flashing in Ozone Park controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.

Local Companies

City Knickerbocker
(212) 586-3940
665 11 Av W 48th St
New York, NY
Lendy Electric Equipment & Supply Corporation
(212) 941-1334
176 Grand St
New York, NY
Himalayan Lights
(212) 877-2159
200 W. 86th Street
New York, NY
Weiss & Biheller
(212) 979-6990
440 Nepperhan Avenue
Yonkers, NY
Renaissance Electric Corp
(718) 515-2853
4039 Laconia Ave
Bronx, NY
Arc Lighting Design
(212) 465-1838
20 W 36th St
New York, NY
Columbia Interiors Incorporated
(212) 725-5250
200 E 33rd St
New York, NY
New York Affordable Reliable Electricity Alliance
(212) 683-1203
347 Fifth Avenue
New York, NY
Illuminetrix, Inc
516-798-1309
87 Pennsylvania Avenue
Massapequa, NY
RBK NEW YORK CORP
(516) 825-3268
29 Aberdeen Street
Malverne, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 2000

Why do people install flashings beneath masonry sills? Are they required if a single-piece stone sill is used?

Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill. These flashings are especially important when using rowlock brick sills or other sills that have many joints. Multiple joints increase the risk of developing excessive water penetration into the masonry below.

In hot humid climates, sill flashings may also be helpful in preventing hot humid cavity air from condensing on the underside and perimeter of the window. In this case, the sill flashings should be integrated with a cavity seal at the window head and jambs.

When using a single-piece stone or precast concrete at a window, the flashing is less important. Very little water will penetrate a single-piece stone or concrete sill. Flashings, however, are still useful in controlling water penetration at perimeter sealant joints or preventing hot humid cavity air from reaching the perimeter of the window. Where flashing is not used, the stone or precast concrete sill should project beyond the face of the masonry and contain a drip. This will prevent water penetration at the joint beneath the sill. This joint will often crack due to differential m...

Click here to read full article from Masonry Construction

Related Articles
- Eco-Friendly Products Ozone Park NY
The advent of photovoltaic solar electric systems that connect and interact with grid power has opened up new categories of products to monitor, distribute, store, and control electrical supply and demand to and from solar-powered homes.
- Flashing Factors Ozone Park NY
- High-Efficiency Products Ozone Park NY
- Home Siding Tips Ozone Park NY
- Home Exterior Products Ozone Park NY
- Flashing and Sill Products Ozone Park NY
- Inner Corner at Base of Wall Ozone Park NY
- Flashing in Siding Installations Ozone Park NY