Flashing at Sills Manlius NY

Sill flashing in Manlius controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.

Local Companies

Food Industry Futures
(315) 682-7455
120 Marangale Rd
Manlius, NY
Roi Consulting Group Inc
(315) 682-6128
36 Jarvis Dr
Manlius, NY
Case Manangement Associates
(315) 682-4402
4894 Memory Ln
Manlius, NY
Samsom Mgmt Corp
(212) 888-0134
865 United Nations Plz
New York, NY
Solil Management Co
(718) 239-0354
2185 White Plains Rd
Bronx, NY
Scg Inc
(315) 637-0001
4836 Briarwood Ln
Manlius, NY
C R S Inc
(315) 682-7455
120 Marangale Rd
Manlius, NY
Seven Pines Consulting Group
(315) 682-0301
8104 Cazenovia Rd
Manlius, NY
Exodus Associates
(212) 491-3993
210 W 146th St
New York, NY
Asset Tracking & Management
(718) 625-5099
158 Pioneer St
Brooklyn, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 2000

Why do people install flashings beneath masonry sills? Are they required if a single-piece stone sill is used?

Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill. These flashings are especially important when using rowlock brick sills or other sills that have many joints. Multiple joints increase the risk of developing excessive water penetration into the masonry below.

In hot humid climates, sill flashings may also be helpful in preventing hot humid cavity air from condensing on the underside and perimeter of the window. In this case, the sill flashings should be integrated with a cavity seal at the window head and jambs.

When using a single-piece stone or precast concrete at a window, the flashing is less important. Very little water will penetrate a single-piece stone or concrete sill. Flashings, however, are still useful in controlling water penetration at perimeter sealant joints or preventing hot humid cavity air from reaching the perimeter of the window. Where flashing is not used, the stone or precast concrete sill should project beyond the face of the masonry and contain a drip. This will prevent water penetration at the joint beneath the sill. This joint will often crack due to differential m...

Click here to read full article from Masonry Construction

Related Articles
- Eco-Friendly Products Manlius NY
The advent of photovoltaic solar electric systems that connect and interact with grid power has opened up new categories of products to monitor, distribute, store, and control electrical supply and demand to and from solar-powered homes.
- Flashing Factors Manlius NY
- Flashing in Siding Installations Manlius NY
- Inner Corner at Base of Wall Manlius NY
- High-Efficiency Products Manlius NY
- Home Exterior Products Manlius NY
- Flashing and Sill Products Manlius NY
- Home Siding Tips Manlius NY