Flashing at Sills Cohoes NY

Sill flashing in Cohoes controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.

Local Companies

IV-Bf Business Services
(718) 992-2580
190 E 166th St
Bronx, NY
Tri State Management & Broker Llc
(718) 227-8300
4045 Amboy Rd
Staten Island, NY
In Quiro
(914) 328-9449
701 Westchester Ave
West Harrison, NY
Intellectual Capital Services
(212) 601-2722
350 5th Ave Ste 1801
New York, NY
Anytime Emergency Towing
(646) 237-9304
32 Bleecker St
New York, NY
Sagemark Consulting
(315) 428-8484
100 Madison St
Syracuse, NY
Empire Management Consultants Inc
(585) 458-7060
655 Pullman Ave
Rochester, NY
K S & R
(315) 470-1350
500 S Salina St Ste 900
Syracuse, NY
Westchester Management
(914) 235-2231
700 Davenport Ave
New Rochelle, NY
Management Recruiters of Mid-Hudson Valley
(845) 227-3161
2537 Route 52 Ste 14
Hopewell Junction, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 2000

Why do people install flashings beneath masonry sills? Are they required if a single-piece stone sill is used?

Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill. These flashings are especially important when using rowlock brick sills or other sills that have many joints. Multiple joints increase the risk of developing excessive water penetration into the masonry below.

In hot humid climates, sill flashings may also be helpful in preventing hot humid cavity air from condensing on the underside and perimeter of the window. In this case, the sill flashings should be integrated with a cavity seal at the window head and jambs.

When using a single-piece stone or precast concrete at a window, the flashing is less important. Very little water will penetrate a single-piece stone or concrete sill. Flashings, however, are still useful in controlling water penetration at perimeter sealant joints or preventing hot humid cavity air from reaching the perimeter of the window. Where flashing is not used, the stone or precast concrete sill should project beyond the face of the masonry and contain a drip. This will prevent water penetration at the joint beneath the sill. This joint will often crack due to differential m...

Click here to read full article from Masonry Construction

Related Articles
- Inner Corner at Base of Wall Cohoes NY
The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.
- Home Exterior Products Cohoes NY
- Flashing and Sill Products Cohoes NY
- Home Siding Tips Cohoes NY
- High-Efficiency Products Cohoes NY
- Flashing Factors Cohoes NY
- Eco-Friendly Products Cohoes NY
- Flashing in Siding Installations Cohoes NY