Flashing at Sills Brockport NY

Sill flashing in Brockport controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.

Local Companies

Business Resource Link
(585) 637-3640
4224 Sweden Walker Rd
Brockport, NY
M A Polce Consulting Inc
(315) 484-9214
500 S Salina St
Syracuse, NY
Septon Development Group Inc
(845) 338-2835
30 Broadway
Kingston, NY
Laral Management
(607) 334-5653
Hillside Apt
Norwich, NY
Bond Street Llc
(212) 277-7600
1430 Broadway Rm 1202
New York, NY
Architectural Landscape Lighting Design LLC
(585) 503-0697
66 Strohm St.
Rochester, NY
Epapi Ltd International Business Consulting
(845) 496-9022

Blooming Grove, NY
Coaching Potentials
(914) 777-1980
110 Webster Ave
Harrison, NY
Lynngale Management Inc
(518) 785-4547
PO Box 427
Newtonville, NY
Kings Nuclear Imaging
(718) 758-3300
3131 Kings Hwy
Brooklyn, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 2000

Why do people install flashings beneath masonry sills? Are they required if a single-piece stone sill is used?

Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill. These flashings are especially important when using rowlock brick sills or other sills that have many joints. Multiple joints increase the risk of developing excessive water penetration into the masonry below.

In hot humid climates, sill flashings may also be helpful in preventing hot humid cavity air from condensing on the underside and perimeter of the window. In this case, the sill flashings should be integrated with a cavity seal at the window head and jambs.

When using a single-piece stone or precast concrete at a window, the flashing is less important. Very little water will penetrate a single-piece stone or concrete sill. Flashings, however, are still useful in controlling water penetration at perimeter sealant joints or preventing hot humid cavity air from reaching the perimeter of the window. Where flashing is not used, the stone or precast concrete sill should project beyond the face of the masonry and contain a drip. This will prevent water penetration at the joint beneath the sill. This joint will often crack due to differential m...

Click here to read full article from Masonry Construction

Related Articles
- Eco-Friendly Products Brockport NY
The advent of photovoltaic solar electric systems that connect and interact with grid power has opened up new categories of products to monitor, distribute, store, and control electrical supply and demand to and from solar-powered homes.
- Flashing Factors Brockport NY
- Home Siding Tips Brockport NY
- Flashing in Siding Installations Brockport NY
- Inner Corner at Base of Wall Brockport NY
- Home Exterior Products Brockport NY
- Flashing and Sill Products Brockport NY
- High-Efficiency Products Brockport NY