Flashing at Sills Bethpage NY

Sill flashing in Bethpage controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.

Local Companies

RBK NEW YORK CORP
(516) 825-3268
29 Aberdeen Street
Malverne, NY
WAC Lighting
1.800.526.2588
615 South Street
Garden City, NY
Certifine Management
(516) 465-2850
451 Central Ave
Bethpage, NY
Duggan Janet & Assoc Inc
(914) 238-3674
121 King St
Chappaqua, NY
Dei Management Group Inc
(212) 563-3049
252 W 37th St
New York, NY
Illuminetrix, Inc
516-798-1309
87 Pennsylvania Avenue
Massapequa, NY
Illuminations
516-766-4880
251 Sunrise Highway
Rockville Centre, NY
Successful Concepts
(516) 827-0808
280 Broadway
Bethpage, NY
Hoburn Management Corp
(212) 397-7269
45 W 60th St Apt 9A
New York, NY
Management Advisory Group
(516) 621-0248
168 Elm St
Roslyn Heights, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: July 1, 2000

Why do people install flashings beneath masonry sills? Are they required if a single-piece stone sill is used?

Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill. These flashings are especially important when using rowlock brick sills or other sills that have many joints. Multiple joints increase the risk of developing excessive water penetration into the masonry below.

In hot humid climates, sill flashings may also be helpful in preventing hot humid cavity air from condensing on the underside and perimeter of the window. In this case, the sill flashings should be integrated with a cavity seal at the window head and jambs.

When using a single-piece stone or precast concrete at a window, the flashing is less important. Very little water will penetrate a single-piece stone or concrete sill. Flashings, however, are still useful in controlling water penetration at perimeter sealant joints or preventing hot humid cavity air from reaching the perimeter of the window. Where flashing is not used, the stone or precast concrete sill should project beyond the face of the masonry and contain a drip. This will prevent water penetration at the joint beneath the sill. This joint will often crack due to differential m...

Click here to read full article from Masonry Construction

Related Articles
- Inner Corner at Base of Wall Bethpage NY
The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.
- High-Efficiency Products Bethpage NY
- Home Exterior Products Bethpage NY
- Home Siding Tips Bethpage NY
- Flashing and Sill Products Bethpage NY
- Eco-Friendly Products Bethpage NY
- Flashing in Siding Installations Bethpage NY
- Flashing Factors Bethpage NY