Flashing Factors Utica NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in Utica.

Local Companies

Distinguish Design
(315) 247-4451
5081 SPRING ROAD
VERONA, NY
Tony Toscano Inc
(516) 364-3012
2050 Crest Rd
Syosset, NY
Custom Stone Design Inc
(845) 744-2728
Red Barn Rd
Walker Valley, NY
De Marco Masonry Co Inc
(716) 667-0815
3689 California Rd
Orchard Park, NY
Mahoney Bros Inc
(914) 963-6163
354 Ashburton Ave
Yonkers, NY
Lamb's Construction Inc
(315) 363-5537
146 E. Campbell Ave
Sherrill, NY
Priore J Constr
(315) 724-5640
316 Ontario St
Utica, NY
F W Koehler & Sons
(631) 841-3991
555 Albany Ave
Amityville, NY
Larosa Anthony Custom Masonry
(518) 745-5202
17 Moorwood Dr
Queensbury, NY
Ew's Southfork Mason Supply Inc
(631) 325-3312
1212 Speonk Riverhead Rd
Speonk, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Eco-Friendly Products Utica NY
The advent of photovoltaic solar electric systems that connect and interact with grid power has opened up new categories of products to monitor, distribute, store, and control electrical supply and demand to and from solar-powered homes.
- Flashing in Siding Installations Utica NY
- Green Products - Product Reviews Utica NY
- Home Siding Tips Utica NY
- High-Efficiency Products Utica NY
- Flashing and Sill Products Utica NY
- Flashing at Sills Utica NY
- Inner Corner at Base of Wall Utica NY
- Home Exterior Products Utica NY