Flashing Factors New Hartford NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in New Hartford.

Local Companies

Lamb's Construction Inc
(315) 363-5537
146 E. Campbell Ave
Sherrill, NY
Distinguish Design
(315) 247-4451
5081 SPRING ROAD
VERONA, NY
Block and Rocks
(315) 363-3814
1060 Cobb St
Oneida, NY
Masonry Stoneledge
(315) 733-7243
4067 State Route 12
New Hartford, NY
Lari Construction Limited
(315) 701-0444
2572 Erie Blvd E
Syracuse, NY
Canastota Concrete Company
(315) 363-4240
East Walnut Street
Oneida, NY
MEID Construction
(315) 361-1768
1341 Middle Rd
Oneida, NY
Boylan Marble & Terrazzo Restoration
315-363-3365
1816 W. Elm Street
Oneida, NY
Snyder Engineering & Land Survey
(315) 361-4639
214 Cedar St.
Oneida, NY
Casler Masonry Inc-Warehouse
(315) 253-5374
692 Cayuga Rd
Cayuga, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Inner Corner at Base of Wall New Hartford NY
The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.
- High-Efficiency Products New Hartford NY
- Green Products - Product Reviews New Hartford NY
- Flashing and Sill Products New Hartford NY
- Eco-Friendly Products New Hartford NY
- Home Siding Tips New Hartford NY
- Home Exterior Products New Hartford NY
- Flashing in Siding Installations New Hartford NY
- Flashing at Sills New Hartford NY