Flashing Factors Lynbrook NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in Lynbrook.

Local Companies

Atria Builder
(212) 876-2756
330 E 109th St
New York, NY
Ivonne Ibarra
(212) 398-6881
108 W. 39th Street
New York, NY
Bargain Tile
516-593-3939
430 Sunrise Highway
Lynbrook, NY
N & M Demolition Inc
(718) 965-8024
992 4th Avenue
Brooklyn, NY
Uvs Construction
(718) 554-0426
Beach 74Th St
Arverne, NY
Alpha Construction Group Inc
(212) 868-5515
115 W 29th St
New York, NY
Bac Construction
(212) 348-1758
3 E 94th St
New York, NY
Dream Awnings & Signs
(718) 707-0140
36-07 21Street
Long Island City, NY
junk junkies, junk removal, nyc-stay clutter free, live green!
888-433-4133
229-19 merrick blvd suite345
jamaica, NY
Gotham Builders
800-444-4923
203- 20 Rocky Hill Road
Bayside, NY
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Home Siding Tips Lynbrook NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- Eco-Friendly Products Lynbrook NY
- Flashing and Sill Products Lynbrook NY
- Green Products - Product Reviews Lynbrook NY
- High-Efficiency Products Lynbrook NY
- Flashing at Sills Lynbrook NY
- Home Exterior Products Lynbrook NY
- Inner Corner at Base of Wall Lynbrook NY
- Flashing in Siding Installations Lynbrook NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details