Flashing Factors Liverpool NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in Liverpool.

Local Companies

J.P. Megnin General Contracting
(315)391-1383
938 Cty Rt 11
West Monroe, NY
Expert Chimney Services, Inc
315 469 5004
4800 McDonald Rd
Syracuse, NY
Hess Corporation
(315) 234-5330
100 Clinton Sq.
Syracuse, NY
Stewart Masonary
(518) 762-2552
1719 State Highway 67
Johnstown, NY
K C Masonry Inc
(315) 253-5007
265 Genesee St
Auburn, NY
Nu-Crete
315-720-6599
P.O. Box 145
Baldwinsville, NY
Ryan Heneka's Decorative Concrete
315.506.0336
105 Melvin Avenue
Liverpool, NY
New Heritage Woodworking
315-677-3884
7022 Bush Road
Jamesville, NY
ASA Contractors Inc
(585) 548-2235
5884 Merrill Rd
Byron, NY
Stonelove Masonry
(585) 256-1800
1080 South Ave
Rochester, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Home Siding Tips Liverpool NY
After installing window and door trim, either make flashing using a sheet metal brake or apply flashing pre-bent to the correct trim size. Nail your flashing to the wall, not to the trim, because if you put holes in the flashing, you've defeated its purpose.
- Home Exterior Products Liverpool NY
- Flashing in Siding Installations Liverpool NY
- Flashing and Sill Products Liverpool NY
- Eco-Friendly Products Liverpool NY
- Green Products - Product Reviews Liverpool NY
- Inner Corner at Base of Wall Liverpool NY
- Flashing at Sills Liverpool NY
- High-Efficiency Products Liverpool NY