Flashing Factors Fresh Meadows NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in Fresh Meadows.

Local Companies

Home Helper Agency
(212) 768-9759
165 W. 46th Street
New York, NY
slr general construction
1646 420 2006
173 morton blvd
plainview, NY
Ideal Construction
(201) 792-7464
188 Manhattan Ave
Jersey City, NJ
Uvs Construction
(718) 554-0426
Beach 74Th St
Arverne, NY
Kilpatrick Contractor
(914) 236-5421
49 Huber Place
Yonkers, NY
new age roofing
718-626-0027
60-74 70 street
maspeth, NY
Omnibuild, LLC
(212) 419-1930
29 Broadway
New York, NY
JC Homecare
631 756 5600
200 Rt 110
Farmingdale, NY
Gotham Builders
800-444-4923
203- 20 Rocky Hill Road
Bayside, NY
Van Go General Contracting
(201) 387-9013
326 So. Washington Ave
Bergenfield, NJ
Data Provided by:
  

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Flashing at Sills Fresh Meadows NY
Sill flashing controls water that penetrates through the masonry sill and helps control water penetrating the perimeter sealant joint around the windows. The sill flashing will prevent water from saturating the top of the masonry beneath the sill.
- Home Siding Tips Fresh Meadows NY
- Inner Corner at Base of Wall Fresh Meadows NY
- Flashing and Sill Products Fresh Meadows NY
- Green Products - Product Reviews Fresh Meadows NY
- Home Exterior Products Fresh Meadows NY
- High-Efficiency Products Fresh Meadows NY
- Flashing in Siding Installations Fresh Meadows NY
- Eco-Friendly Products Fresh Meadows NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details