Flashing Factors Brewster NY

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments in Brewster.

Local Companies

Pioneer Blacktopping
(123) 456-7890
10 North Street
Wappingers Falls, NY
Cafarelli Carpentry, Tile and Handyman Contracting
845-453-1690
33 Townview Dr
Wappingers falls, NY
ilias painting and paper hanging inc
845-282-9066
53 rodeo dr
hopewell jct, NY
MV custom inc
845 2262375
803 beekman road
hopewell jct, NY
Mc Auliffe Construction Co
845-225-1746 or 914-419-7101
Po Box 810 Carmel, NY.
Carmel, NY
A-Plus Concrete, LLC
203-744-7661
Danbury
Danbury, CT
EQUADORIAN MASONRY
203.979.6707
149 Dudley Road
Wilton, CT
fabian nova
(914) 843-2838
32 maple av
mt kisco, NY
N E C NORTH EASTERN CONTRACTING
845-298-4400
1127 RT 9
wappinger falls, NY
jmc:contracting work corp
1914 672 7119
627 highland ave
peekskill, NY

Provided By:

Source: MASONRY CONSTRUCTION MAGAZINE
Publication date: October 1, 2005

Should flashing be used beneath rowlock brick window sills? If through-wall flashing is installed beneath these rowlocks, how are the sills anchored? If the anchors penetrate the flashing, does this lead to deterioration of the masonry below in freeze-thaw environments?

Rowlock brick sills contain many joints and are particularly susceptible to water penetration. For this reason, I do not recommend their use in freeze-thaw environments.

When they are used in freeze-thaw environments, however, the flashing beneath them is critical to prevent water from saturating the top of the masonry wall below. Snow and ice collects on the rowlock sills. When they melt, water can penetrate the sills and refreeze, resulting in deterioration. This scenario is a particular problem with the anchorage of these sills because they break apart.

When rowlock sills are used, they can be anchored using galvanized corrugated wall ties in the head joint between every fourth to sixth brick unit. When possible, I prefer that these anchors be attached to the backup wall on the vertical face, behind the sill.

It also is possible to extend flat strap anchors through the flashing. However, any penetrations through the flashing must be carefully sealed.

Click here to read full article from Masonry Construction

Related Articles
- Flashing in Siding Installations Brewster NY
A constant problem that contractors see in siding installations is improper flashing or, even worse, no flashing at all. Relying on caulk alone to keep water from leaking into homes is not a good practice. Whether you're talking about wood, fiber-cement, or vinyl siding, three areas in particular can prove problematic.
- Flashing and Sill Products Brewster NY
- Inner Corner at Base of Wall Brewster NY
- High-Efficiency Products Brewster NY
- Green Products - Product Reviews Brewster NY
- Home Siding Tips Brewster NY
- Eco-Friendly Products Brewster NY
- Home Exterior Products Brewster NY
- Flashing at Sills Brewster NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details