First Test: T-Drill T-35 Tee-Forming Tool Oswego NY

A T-Drill is a unique, incredible plumber's tool in Oswego that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.

Local Companies

Raby's Ace Home Center
(315) 342-9663
247 Washington Blvd
Oswego, NY
Brewerton Building Supply
(315) 676-2300
46 Corporate Park Dr
Central Square, NY
Burkes Do it Best Home Center
315-343-6147
38 East Second Street
Oswego, NY
Kmart 7451 / Cross Merch
(315) 598-9641
2078 State Rte 481
Fulton, NY
Miggins Screw Prods Inc
(845) 279-2307
Putnm Avenue Ext
Brewster, NY
Ty It Together
315-402-5655
91 East 4th Street
Oswego, NY
Fastenal- Fulton
315-593-6445
366 W. 1st St South Fulton, NY, 13069
Fulton, NY
Burke's Home Center
315-592-2244
65 North Second Street
Fulton, NY
Lowe's
(315) 326-5030
445 State Route 104
Oswego, NY
Cloonan's Air-Cooled Engines
(315) 343-3104
Hall Rd
Oswego, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: September 12, 2007

By Michael Springer

A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.

A T-Drill pulls a tee out of a continuous run of copper tubing. It consists of a drill motor with a high-tech business end that does the holding, drilling, and forming. Here's how it works: support legs at the head of the drill hold it centered on a piece of tubing. With the desired outlet-size T-Drill head attached, a pilot hole is drilled into the tube; then, with the bit still in the tube, two forming pins built into the pilot bit are extended by rotating a collar on the head.

After engaging the reverse-feed mechanism lever, the support legs push against the tubing, and the spinning forming pins back out of the tube, leaving a tee outlet of the proper size. And all of this is done in mere seconds.

Then the branch, or outlet, section of tubing is prepared by placing it in a T-Drill notcher, where it is cut to the sameradius as the tube run so the branch does not project into the run of tube. The notcher also leaves two dimples on the branch. These serve as a depth stop, an alignment guide, and provide for easy inspection of the joint.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Oswego NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Home Repair Tools Oswego NY
- Hand Tools Oswego NY
- Graphisoft EcoDesigner Oswego NY
- Framing Square Oswego NY
- Hidden-Fastener Tool Oswego NY
- INNOVA® 3100 Tools Oswego NY
- Drywall Cutting and Multifunction Bench Oswego NY
- Hitachi KM 12VC Router Combination Kit Oswego NY
- Festool C12 Cordless Drill Oswego NY