First Test: T-Drill T-35 Tee-Forming Tool Massapequa Park NY

A T-Drill is a unique, incredible plumber's tool in Massapequa Park that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 694-1100
1102 Broadhollow Rd, Corner of Rte. 110 & Main St.
Farmingdale, NY
Northport Hardware Company
631-261-4449
90 Main Street
Northport, NY
The Home Depot
(718)558-8640
92-30 168th Street
Jamaica, NY
Hicksville - A
(516) 733-3000
195 N Broadway
Hicksville, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Five Star Lumber & Home Ctrs
516-872-2700
210 E Merrick Rd
Valley Stream, NY
Smithtown Do it Best
631-863-3200
82 West Main Street
Smithtown, NY
The Home Depot
(516)997-9595
86 Jericho Turnpike
Jericho, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: September 12, 2007

By Michael Springer

A T-Drill is a unique, incredible plumber's tool that I've relied on to give me a competitive edge for nearly a decade, yet most people–including many plumbers–have never heard of it. So when I was asked to review the new T-35, I was eager to see what kind of improvements they made to this amazing tool.

A T-Drill pulls a tee out of a continuous run of copper tubing. It consists of a drill motor with a high-tech business end that does the holding, drilling, and forming. Here's how it works: support legs at the head of the drill hold it centered on a piece of tubing. With the desired outlet-size T-Drill head attached, a pilot hole is drilled into the tube; then, with the bit still in the tube, two forming pins built into the pilot bit are extended by rotating a collar on the head.

After engaging the reverse-feed mechanism lever, the support legs push against the tubing, and the spinning forming pins back out of the tube, leaving a tee outlet of the proper size. And all of this is done in mere seconds.

Then the branch, or outlet, section of tubing is prepared by placing it in a T-Drill notcher, where it is cut to the sameradius as the tube run so the branch does not project into the run of tube. The notcher also leaves two dimples on the branch. These serve as a depth stop, an alignment guide, and provide for easy inspection of the joint.

Click here to read full article from Tools of the Trade

Related Articles
- Festool C12 Cordless Drill Massapequa Park NY
Festool C12 is the best 12-volt drill/driver I've ever used. As powerful and versatile as it is small, Festool's C12 sets a new category standard. I tested it drilling small and large holes, driving various lengths of wood screws and Tapcons, and even mixing thinset. The C12 was a great tool at every step.
- Drywall Cutting and Multifunction Bench Massapequa Park NY
- Hitachi KM 12VC Router Combination Kit Massapequa Park NY
- Graphisoft EcoDesigner Massapequa Park NY
- Hidden-Fastener Tool Massapequa Park NY
- INNOVA® 3100 Tools Massapequa Park NY
- Home Repair Tools Massapequa Park NY
- Framing Square Massapequa Park NY
- Hand Tools Massapequa Park NY
- Festool Joining System Massapequa Park NY