Fighting Fastener Corrosion Yonkers NY

Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.

Local Companies

Craig Custom Builders
144 Osceola Rd
Wayne, NJ
SilverLining Interiors, Inc.
2091 Broadway, third floor
New York, NY
Franzoso Contracting
33 Croton Point Ave.
Croton-on-Hudson, NY
Matthew & Tony General Landscaping Inc
(914)287-0641
78 North Central Avenue
Elmsford, NY
Earthworks Landscape Construction LLC
(845)362-0719
606 New Hempstead Rd
Spring Valley, NY
Len Van Builders
31 Stalter Drive
Wayne, NJ
G&L and Sons Renovations
153 Young Ave.
Cedar Grove, NJ
Paragon Installers, LLC
556 N. Route 17
Paramus, NJ
Dream Gardens & Pond Inc
(718)445-8773
91 Roosevelt Drive
East Norwich, NY
Emerald Tree Care
(914)835-6533
26 Fox Meadow Road
Scarsdale, NY
Data Provided by:
  

What’ll you have with that wood preservative: Hot-dip galvanized, polymer coated, or stainless steel?

by Jefferson Kolle



Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir. Buying hardware and fasteners was straightforward too. Inside the lumberyard, you’d load up on nails, nuts, bolts, screws, and maybe joist hangers. And you’d be good to go.

Buying lumber and fasteners is no longer so straightforward. Since CCA was withdrawn from the residential market in 2004, new preservatives have taken its place. The corrosiveness of some of these chemicals has in turn spawned new types of corrosion-resistant hardware, which have left deck builders wondering which ones work best and if the best ones are worth the money.

A Little Chemistry
According to Dr. Pascal Kamdem, professor of wood science and technology at Michigan State University, chromated copper arsenate (CCA) pressure-treated wood was phased out because European countries objected to the chromium, while concerns in the United States centered around the arsenic. “Chemical companies wanted a pressure-treating formula that would be acceptable worldwide, so they got rid of both objectionable chemicals.”

Click here to read full article from Deck Magaziner

Related Articles
- Flue Liners for Masonry Chimneys Yonkers NY
Building codes require that residential masonry chimneys with walls thinner than 8 inches (nominal) be lined with a fire clay flue lining, fire clay brick, or a material that resists corrosion, softening, and cracking from flue gases as hot as 1,800 degrees Fahrenheit.
- Galvanized Wall Ties Yonkers NY
- Hidden Decking Fasteners Yonkers NY
- Formwork Rust Yonkers NY
- Hidden-Fastener Tool Yonkers NY
- Home Exterior Ideas Yonkers NY
- Galvanized Wall Ties Yonkers NY
- Fasteners and Connectors Yonkers NY