Fighting Fastener Corrosion Islip NY

Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir.

Local Companies

Kuhn Construction, Inc
417 Main St
Islip, NY
Masterscape Landscaping & Design
(631)654-3536
842 Bohemia Parkway
Bohemia, NY
Scenic Isle Landscape Design
(516)694-2071
22 Larkspur Court
Farmingdale, NY
Landscape Techniques Inc
(516)681-5732
Cedar SWamp Road
Jericho, NY
Empire Landscape & Design Inc
(631)661-8663
24 Malmac Court
West Islip, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
Legacy Builders and Remodelers
1363-8 Lincoln Ave
Holbrook, NY
Lee Hanson Sprinklers
(516)249-6192
68 Vandewater Street
Farmingdale, NY
Rocky Construction & Landscaping
(631)271-6579
163 1st Avenue
Huntington Station, NY
Crystal Clear Contrctng
(631)777-7370
70 Dale Street
West Babylon, NY
Data Provided by:
  

What’ll you have with that wood preservative: Hot-dip galvanized, polymer coated, or stainless steel?

by Jefferson Kolle



Deck building used to be simpler. At the lumberyard, you’d load up on CCA-treated 2-by stock for the floor system, 6x6s for the posts, and whatever the budget allowed for the decking — anything from 1x6 pressure treated to more-expensive 1x4 Doug fir. Buying hardware and fasteners was straightforward too. Inside the lumberyard, you’d load up on nails, nuts, bolts, screws, and maybe joist hangers. And you’d be good to go.

Buying lumber and fasteners is no longer so straightforward. Since CCA was withdrawn from the residential market in 2004, new preservatives have taken its place. The corrosiveness of some of these chemicals has in turn spawned new types of corrosion-resistant hardware, which have left deck builders wondering which ones work best and if the best ones are worth the money.

A Little Chemistry
According to Dr. Pascal Kamdem, professor of wood science and technology at Michigan State University, chromated copper arsenate (CCA) pressure-treated wood was phased out because European countries objected to the chromium, while concerns in the United States centered around the arsenic. “Chemical companies wanted a pressure-treating formula that would be acceptable worldwide, so they got rid of both objectionable chemicals.”

Click here to read full article from Deck Magaziner

Related Articles
- Formwork Rust Islip NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- Galvanized Wall Ties Islip NY
- Flue Liners for Masonry Chimneys Islip NY
- Fasteners and Connectors Islip NY
- Galvanized Wall Ties Islip NY
- Home Exterior Ideas Islip NY
- Hidden-Fastener Tool Islip NY
- Hidden Decking Fasteners Islip NY