Fiber Reinforced Concrete Oceanside NY

Over the last few decades, material scientists in Oceanside have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(516) 280-7885
2323 Jericho Turnpike, In Pathmark Shopping Center/Near Charlie Brown's
Garden City Park, NY
The Home Depot
(718)862-9800
1806 E Gunhill Rd
Bronx, NY
The Home Depot
(631)242-0215
475 Commack Road
Deer Park, NY
Kmart 3861 / Cross Merch
(631) 661-1234
1000 Montauk Hwy
West Babylon, NY
Monster Woodshop
888-506-6678
607 18th Street
Brooklyn, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Atlantic Do it Best Hardware
516-623-0683
165 Atlantic Ave
Freeport, NY
The Home Depot
(718)333-9850
2970 Cropsey Avenue
Brooklyn, NY
Kmart 9420 / Cross Merch
(718) 430-9439
1998 Bruckner Blvd
Bronx, NY
Data Provided by:
  

Source: CONCRETE PRODUCER MAGAZINE
Publication date: November 1, 2006

By Victor C. Li

Over the last few decades, material scientists have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Ever since concrete was made by the Romans 2000 years ago, it has been known for this brittleness. Concrete's brittleness has at times been responsible for catastrophic failures of structures, but more often results in a gradual deterioration that requires repeated and costly repairs. Many attempts have been made to modify concrete so it can take tensile load. Today, the most effective modification has been the introduction of fibers, typically made of steel, glass, or polymer, resulting in fiber-reinforced concrete.

It has been a dream of concrete engineers to produce a concrete that retains the beneficial properties of conventional concrete, such as high compressive strength and non-rusting. Yet at the same time, the final product should possess the tensile ductility of steel so yielding, instead of fracturing, occurs when the concrete is overloaded.

It's true that this design feature can be achieved with fiber reinforcement. However, the past strategy has been to use a lot of fibers (more than 5% in volume), often in aligned or fabric form.

Click here to read full article from The Concrete Producer

Related Articles
- Incorrect Testing Practices Oceanside NY
Conducting other tests improperly can also cause rejection of in-spec concrete at the jobsite. Have your drivers learn the correct methods for sampling concrete, measuring slump and air content, and making and curing strength-test specimens in the field. They're your first line of defense against needlessly rejected loads of concrete.
- Green Construction Oceanside NY
- In Style with Tile Oceanside NY
- Fibers for Permeability Oceanside NY
- Formwork Rust Oceanside NY
- Inner Corner at Base of Wall Oceanside NY
- Galvanized Wall Ties Oceanside NY
- Eliminating Swirls in Precast Panels Oceanside NY
- Form-Release Agents Oceanside NY
- Galvanized Wall Ties Oceanside NY