Fiber Reinforced Concrete Liverpool NY

Over the last few decades, material scientists in Liverpool have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Local Companies

Fastenal- Syracuse
315-474-0970
920 Spencer Street Syracuse, NY, 13204
Syracuse, NY
Vella's Do it Best Home Center
315-623-9786
45 Redfield St
Constantia, NY
Wrightway True Value Hardware
(315) 695-2394
9236 Oswego Rd
Baldwinsville, NY
The Home Depot
(315)622-0702
3861 State Route 31
Liverpool, NY
Kmart 3115 / Cross Merch
(315) 445-1904
3469 Erie Blvd E
De Witt, NY
Salt City Hardware
(315) 362-3254
325 Nottingham Rd
Syracuse, NY
McGowan's Hardware
315-687-6168
991 E Genesse St
Chittenango, NY
Valu Home Center #52
315-414-0186
123 Shop City Plaza
Syracuse, NY
Bobs True Value Hardware
(315) 469-4065
4805 S Salina St
Syracuse, NY
Kmart 3352 / Cross Merch
(315) 652-4494
8007 Oswego Rd
Liverpool, NY

Source: CONCRETE PRODUCER MAGAZINE
Publication date: November 1, 2006

By Victor C. Li

Over the last few decades, material scientists have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Ever since concrete was made by the Romans 2000 years ago, it has been known for this brittleness. Concrete's brittleness has at times been responsible for catastrophic failures of structures, but more often results in a gradual deterioration that requires repeated and costly repairs. Many attempts have been made to modify concrete so it can take tensile load. Today, the most effective modification has been the introduction of fibers, typically made of steel, glass, or polymer, resulting in fiber-reinforced concrete.

It has been a dream of concrete engineers to produce a concrete that retains the beneficial properties of conventional concrete, such as high compressive strength and non-rusting. Yet at the same time, the final product should possess the tensile ductility of steel so yielding, instead of fracturing, occurs when the concrete is overloaded.

It's true that this design feature can be achieved with fiber reinforcement. However, the past strategy has been to use a lot of fibers (more than 5% in volume), often in aligned or fabric form.

Click here to read full article from The Concrete Producer

Related Articles
- Formwork Rust Liverpool NY
Steel formwork is used in prefabrication operations because of its robustness and reusability, as well as its ability to produce prefabricated units with smooth surfaces. On these steel molds, brownish-reddish rust spots sometimes form while the concrete hardens. This rust could lead to brown or red spotty discolorations on the concrete surface lower the concrete element's appearance, Fig. 1 .
- In Style with Tile Liverpool NY
- Form-Release Agents Liverpool NY
- Eliminating Swirls in Precast Panels Liverpool NY
- Galvanized Wall Ties Liverpool NY
- Fibers for Permeability Liverpool NY
- Inner Corner at Base of Wall Liverpool NY
- Green Construction Liverpool NY
- Incorrect Testing Practices Liverpool NY
- Galvanized Wall Ties Liverpool NY