Fiber Reinforced Concrete Islip NY

Over the last few decades, material scientists in Islip have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 724-8300
246 Smithtown Blvd, CVS
Nesconset, NY
DYNAMITE TOOL CO
(631) 563-8181
1551 SMITHTOWN AVENUE BOHEMIA, NY, 11716
Bohemia, NY
Comercial Don Benja
(787) 899-3025
Hc 03 Box 27150 Carr 116 Km 0.8
Lajas, NY
Huntington Sq Mall
(631) 462-2100
4000 Jericho Tpke
E Northport, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(516) 644-2450
3899 Hempstead Tpke, Pathmark
Bethpage, NY
East Islip True Value Lumber
(631) 581-1869
33 Wall St
East Islip, NY
Kmart 3861 / Cross Merch
(631) 661-1234
1000 Montauk Hwy
West Babylon, NY
Data Provided by:
  

Source: CONCRETE PRODUCER MAGAZINE
Publication date: November 1, 2006

By Victor C. Li

Over the last few decades, material scientists have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Ever since concrete was made by the Romans 2000 years ago, it has been known for this brittleness. Concrete's brittleness has at times been responsible for catastrophic failures of structures, but more often results in a gradual deterioration that requires repeated and costly repairs. Many attempts have been made to modify concrete so it can take tensile load. Today, the most effective modification has been the introduction of fibers, typically made of steel, glass, or polymer, resulting in fiber-reinforced concrete.

It has been a dream of concrete engineers to produce a concrete that retains the beneficial properties of conventional concrete, such as high compressive strength and non-rusting. Yet at the same time, the final product should possess the tensile ductility of steel so yielding, instead of fracturing, occurs when the concrete is overloaded.

It's true that this design feature can be achieved with fiber reinforcement. However, the past strategy has been to use a lot of fibers (more than 5% in volume), often in aligned or fabric form.

Click here to read full article from The Concrete Producer

Related Articles
- Inner Corner at Base of Wall Islip NY
The concrete masonry can be connected to the corner column with a debonded shear anchor. This type of anchor resists out-of-plane (but not in-plane) shear forces and permits movement between the steel column and concrete masonry.
- Galvanized Wall Ties Islip NY
- Eliminating Swirls in Precast Panels Islip NY
- Fibers for Permeability Islip NY
- Incorrect Testing Practices Islip NY
- Green Construction Islip NY
- Formwork Rust Islip NY
- In Style with Tile Islip NY
- Form-Release Agents Islip NY
- Galvanized Wall Ties Islip NY