Fiber Reinforced Concrete East Islip NY

Over the last few decades, material scientists in East Islip have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Costello's Ace Hardware
(631) 422-5566
448 Union Blvd
West Islip, NY
ABC Supply Co.,Inc/Bohemia
631-285-7710
2950 Veterans Memorial Hwy Bohemia, NY, 11716
Bohemia, NY
Botto Brothers Hardware
(516) 931-0816
231 Broadway
Hicksville, NY
The Home Depot
(631)424-9170
839 New York Avenue
Huntington, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
Costello's Ace Hardware
(631) 243-2220
770-14 Grand Blvd
Deer Park, NY
Ace Hardware
(631) 751-9500
Three Vlg Shpg Ctr, 1366 Rte 25 A, King Kullen Shopping Center
East Setauket, NY
Suffolk Supply True Value
(631) 924-3935
1504 Rocky Point Rd
Middle Island, NY
Data Provided by:
  

Source: CONCRETE PRODUCER MAGAZINE
Publication date: November 1, 2006

By Victor C. Li

Over the last few decades, material scientists have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Ever since concrete was made by the Romans 2000 years ago, it has been known for this brittleness. Concrete's brittleness has at times been responsible for catastrophic failures of structures, but more often results in a gradual deterioration that requires repeated and costly repairs. Many attempts have been made to modify concrete so it can take tensile load. Today, the most effective modification has been the introduction of fibers, typically made of steel, glass, or polymer, resulting in fiber-reinforced concrete.

It has been a dream of concrete engineers to produce a concrete that retains the beneficial properties of conventional concrete, such as high compressive strength and non-rusting. Yet at the same time, the final product should possess the tensile ductility of steel so yielding, instead of fracturing, occurs when the concrete is overloaded.

It's true that this design feature can be achieved with fiber reinforcement. However, the past strategy has been to use a lot of fibers (more than 5% in volume), often in aligned or fabric form.

Click here to read full article from The Concrete Producer

Related Articles
- Fibers for Permeability East Islip NY
Permeability is defined as the property that governs the rate of fluid flow through a porous solid (Ref. 1). The porosity of cement paste determines the permeability of concrete (Ref. 2). The water-cement ratio is one of the largest contributors to porosity development, but, on the whole, porosity is determined through chemical interaction.
- Galvanized Wall Ties East Islip NY
- Formwork Rust East Islip NY
- Incorrect Testing Practices East Islip NY
- Inner Corner at Base of Wall East Islip NY
- In Style with Tile East Islip NY
- Galvanized Wall Ties East Islip NY
- Green Construction East Islip NY
- Form-Release Agents East Islip NY
- Eliminating Swirls in Precast Panels East Islip NY