Fiber Reinforced Concrete Central Islip NY

Over the last few decades, material scientists in Central Islip have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Local Companies

Roberts Plywood Co.
800-422-4944
45 North Industry Court
Deer Park, NY
Lowe's
(631) 927-3470
90 Price Parkway
Farmingdale, NY
Mar-Jam Supply Inc.
631-249-4900
885 Conklin Avenue
Farmingdale, NY
Caguas Commercial
(787) 743-4001
Carretera 189 Km 2.5
Caguas, NY
Sunrise Mall
(516) 797-2400
800 Sunrise Mall
Massapequa, NY
EXOTIC WOODS USA
(631) 651-8651
698 Fort Salonga Rd
Northport, NY
Suburban Mills
631-351-6445
16 Railroad St
Huntington Station, NY
ABC Supply Co.,Inc/Bohemia
631-285-7710
2950 Veterans Memorial Hwy Bohemia, NY, 11716
Bohemia, NY
Bens True Value Hardware
(631) 775-7435
55b Route 25 (middle Country Road)
Coram, NY
Hauppauge - Sears Hardware Stores
(631) 979-2099
564 Veterans Hwy
Hauppauge, NY
Data Provided by:
  

Source: CONCRETE PRODUCER MAGAZINE
Publication date: November 1, 2006

By Victor C. Li

Over the last few decades, material scientists have improved concrete mix designs using technology that has increased strength, durability, placing, and improved environmental aspects. Perhaps the brittle nature of concrete is the last technological barrier to attack.

Ever since concrete was made by the Romans 2000 years ago, it has been known for this brittleness. Concrete's brittleness has at times been responsible for catastrophic failures of structures, but more often results in a gradual deterioration that requires repeated and costly repairs. Many attempts have been made to modify concrete so it can take tensile load. Today, the most effective modification has been the introduction of fibers, typically made of steel, glass, or polymer, resulting in fiber-reinforced concrete.

It has been a dream of concrete engineers to produce a concrete that retains the beneficial properties of conventional concrete, such as high compressive strength and non-rusting. Yet at the same time, the final product should possess the tensile ductility of steel so yielding, instead of fracturing, occurs when the concrete is overloaded.

It's true that this design feature can be achieved with fiber reinforcement. However, the past strategy has been to use a lot of fibers (more than 5% in volume), often in aligned or fabric form.

Click here to read full article from The Concrete Producer

Related Articles
- Fibers for Permeability Central Islip NY
Permeability is defined as the property that governs the rate of fluid flow through a porous solid (Ref. 1). The porosity of cement paste determines the permeability of concrete (Ref. 2). The water-cement ratio is one of the largest contributors to porosity development, but, on the whole, porosity is determined through chemical interaction.
- Green Construction Central Islip NY
- Eliminating Swirls in Precast Panels Central Islip NY
- Form-Release Agents Central Islip NY
- Galvanized Wall Ties Central Islip NY
- Galvanized Wall Ties Central Islip NY
- Incorrect Testing Practices Central Islip NY
- Inner Corner at Base of Wall Central Islip NY
- Formwork Rust Central Islip NY
- In Style with Tile Central Islip NY