Festool Joining System Springfield Gardens NY

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.

Local Companies

KS Construction and Kitchen Cabinets
(917) 864-2670
19541 Jamaica Avenue
Hollis, NY
Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Susan Singer EcoSpaces (Realtor)
(212) 444-7866
636 Sixth Avenue
New York, NY
Eco Brooklyn Inc. - Green Contractor
(347) 244-3016
22 2nd street
Brooklyn, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
Goode Green
212-226-6770
176 Grand Street
New York, NY
Geebros Corp
347-602-6666
768 Allerton Ave
Bronx, NY
David Bergman Architect
(212) 475-3106
241 Eldridge St. 3R
New York, NY
L.I.S. Custom Designs, Inc.
(516) 484-6262
100 Andrews Rd.
Hicksville, NY
Data Provided by:
          

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: June 4, 2007

By Michael Springer

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint. A loose tenon of solid beech called a Domino fits into a slot cut by the tool, saving the time and labor of cutting out exacting tenons, especially on tricky mitered or beveled joints. Five sizes of Domino tenons are available from 3/16 by 1-1/8 inch to 3/8 by 11-5/16 inch, and the smallest can be used on the end of a piece of stock as small as 5/8 by 7/8 inch.

The action of the tool is similar to that of a biscuit joiner: The spring-loaded head that conceals the cutter is lined up against the edge of the stock, and then the cutter is plunged into the wood.

But instead of leaving a semicircular kerf, the router-type cutter of the Domino oscillates side to side and creates a wide, flat groove with curved sides. Mortising with different diameter bits allows for Domino tenons of different thicknesses, and preset depth settings on the machine allow for the different lengths. Besides the exact width of the tenon, there are two increased cutting-width settings that can make up for slight mortise position inaccuracies when lining up the joint.

Click here to read full article from Tools of the Trade

Related Articles
- Franchise Fundamentals Springfield Gardens NY
A residential construction-related franchise can be a great investment — for the right firm or manager. However, the price remodelers have to pay is more than just the purchase cost — it includes significant capital to buy the territory and set up the franchise as well as payment of royalties over the duration of the partnership.
- Drape Wall and Cloak Wall Springfield Gardens NY
- Exterior Siding Products Springfield Gardens NY
- Differences Between Green Globes and LEED Springfield Gardens NY
- Hand-Held Power Saws Springfield Gardens NY
- Drywall Finishing Springfield Gardens NY
- Festool Circ Saw and Guide Rail System Springfield Gardens NY
- FAST Implementation Tips Springfield Gardens NY
- Heavy Lifters Springfield Gardens NY
- Festool C12 Cordless Drill Springfield Gardens NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details