Festool Joining System Long Island City NY

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.

Local Companies

Aaa Chimney Corporation
(201)944-9909
400 Bergen Boulevard
Palisades Park, NJ
Jc General Construction.Inc
201 780 7379
712 26
Union City, NJ
Susan Singer EcoSpaces (Realtor)
(212) 444-7866
636 Sixth Avenue
New York, NY
Mwanzi co.
(212) 551-3563
230 Park Avenue, Suite 1000
New York, NY
Greenstreet Construction
2122341027ext101
68 e 131st Street Suite 600
New York, NY
1St Call Painting Contractors
(908)354-2375
980 Dehart Place
Elizabeth, NJ
Agl Construction Corp.
(201) 783-3799
528 Hudson Street
Hoboken, NJ
Plus Wood Floors
203 4960134
33 23 147 Place
Flushing, NY
David Bergman Architect
(212) 475-3106
241 Eldridge St. 3R
New York, NY
Bio-Solar LLC
(347) 413-5035
234 Madison St
Brooklyn, NY
Data Provided by:
    

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: June 4, 2007

By Michael Springer

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint. A loose tenon of solid beech called a Domino fits into a slot cut by the tool, saving the time and labor of cutting out exacting tenons, especially on tricky mitered or beveled joints. Five sizes of Domino tenons are available from 3/16 by 1-1/8 inch to 3/8 by 11-5/16 inch, and the smallest can be used on the end of a piece of stock as small as 5/8 by 7/8 inch.

The action of the tool is similar to that of a biscuit joiner: The spring-loaded head that conceals the cutter is lined up against the edge of the stock, and then the cutter is plunged into the wood.

But instead of leaving a semicircular kerf, the router-type cutter of the Domino oscillates side to side and creates a wide, flat groove with curved sides. Mortising with different diameter bits allows for Domino tenons of different thicknesses, and preset depth settings on the machine allow for the different lengths. Besides the exact width of the tenon, there are two increased cutting-width settings that can make up for slight mortise position inaccuracies when lining up the joint.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Long Island City NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Heavy Lifters Long Island City NY
- Exterior Siding Products Long Island City NY
- Drape Wall and Cloak Wall Long Island City NY
- Festool C12 Cordless Drill Long Island City NY
- Festool Circ Saw and Guide Rail System Long Island City NY
- Drywall Finishing Long Island City NY
- Hand-Held Power Saws Long Island City NY
- FAST Implementation Tips Long Island City NY
- Franchise Fundamentals Long Island City NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details