Festool Joining System Commack NY

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.

Local Companies

NEW YORK CITY BEST CONSTRUCTION CORP.
347-26-9950
25 BEECHWOOD PLACE
Massapequa Park, NJ
Bothwell F Gerald
(203) 857-0332
158 Bouton St
Norwalk, CT
A & D Quality Home Improvements
203-847-1658
Po Box: 2055
Norwalk, CT
L.I.S. Custom Designs, Inc.
(516) 484-6262
100 Andrews Rd.
Hicksville, NY
A. Oliveri Siding & Remodeling
(631) 588-5032
250 Donald Blvd
Holbrook, NY
Alure Home Improvements
1999 Hempstead Turnpike
East Meadow, NY
S & W Building & Remodeling
(203) 831-8300
18 Reynolds St
Norwalk, CT
12 Gage Electric
(631)451-0601
63 Iriquois Avenue
Selden, NY
Amd Custom Homes
570-730-8150
Po Box 121
Brookhaven, NY
AMRO Supply Inc. - Green Stuff Absorbents
(631) 419-1203
140-11 Keyland Ct.
Bohemia, NY
Data Provided by:
        

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: June 4, 2007

By Michael Springer

Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint. A loose tenon of solid beech called a Domino fits into a slot cut by the tool, saving the time and labor of cutting out exacting tenons, especially on tricky mitered or beveled joints. Five sizes of Domino tenons are available from 3/16 by 1-1/8 inch to 3/8 by 11-5/16 inch, and the smallest can be used on the end of a piece of stock as small as 5/8 by 7/8 inch.

The action of the tool is similar to that of a biscuit joiner: The spring-loaded head that conceals the cutter is lined up against the edge of the stock, and then the cutter is plunged into the wood.

But instead of leaving a semicircular kerf, the router-type cutter of the Domino oscillates side to side and creates a wide, flat groove with curved sides. Mortising with different diameter bits allows for Domino tenons of different thicknesses, and preset depth settings on the machine allow for the different lengths. Besides the exact width of the tenon, there are two increased cutting-width settings that can make up for slight mortise position inaccuracies when lining up the joint.

Click here to read full article from Tools of the Trade

Related Articles
- Heavy Lifters Commack NY
Toyota Material Handling now offers a factory-installed compressed natural gas (CNG) fuel system on its 4,000- to 6,500-pound-capacity internal combustion (IC) cushion tire and 3,000- to 6,500-pound-capacity IC pneumatic lift truck models.
- Festool Circ Saw and Guide Rail System Commack NY
- Drywall Finishing Commack NY
- Franchise Fundamentals Commack NY
- FAST Implementation Tips Commack NY
- Drape Wall and Cloak Wall Commack NY
- Festool C12 Cordless Drill Commack NY
- Differences Between Green Globes and LEED Commack NY
- Hand-Held Power Saws Commack NY
- Exterior Siding Products Commack NY
Related Local Event
Long Island Building & Facility Maintenance Show
Dates: 5/5/09 - 5/8/20
Location: David S. Mack Sports & Exhibition Complex - Hofstra University
Hempstead, NY
View Details