Festool Circ Saw and Guide Rail System Watertown NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Watertown.

Local Companies

Sicard Division of S M I-Snowblast Inc
(315) 786-7669
112 Murrock Cir
Watertown, NY
Arcadia Lawn Mower
(315) 331-2521
1484 Welcher Rd
Newark, NY
Sasco Tools & Equipment
(718) 435-2100
432 Coney Island Ave
Brooklyn, NY
Waild Construction Inc
(716) 692-9846

Tonawanda, NY
Rochester Gutter Co
(585) 385-2910
37 Hillside Rd
Penfield, NY
Gilco
(315) 786-3300
23112 Murrock Cir
Watertown, NY
Ziegler Truck & Diesel Repair
(315) 782-5693
379 Hunt St
Watertown, NY
Roberts Contracting Inc
(845) 566-7663

Newburgh, NY
Phelps Sungas Inc
(315) 536-1085
2381 State Route 14A
Penn Yan, NY
Morgan Tool Rentals Inc
(718) 963-4100
500 Morgan Ave
Brooklyn, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Heavy Lifters Watertown NY
Toyota Material Handling now offers a factory-installed compressed natural gas (CNG) fuel system on its 4,000- to 6,500-pound-capacity internal combustion (IC) cushion tire and 3,000- to 6,500-pound-capacity IC pneumatic lift truck models.
- Home Exterior Products Watertown NY
- Forklift Operation Watertown NY
- Drape Wall and Cloak Wall Watertown NY
- Home Improvement Tools Watertown NY
- FAST Implementation Tips Watertown NY
- Differences Between Green Globes and LEED Watertown NY
- Festool Joining System Watertown NY
- Festool C12 Cordless Drill Watertown NY
- Hand-Held Power Saws Watertown NY