Festool Circ Saw and Guide Rail System Sunnyside NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Sunnyside.

Local Companies

Ridgewood - Storage Post
(718) 366-7464
48-21 Metropolitan Ave
Queens, NY
CubeSmart Self Storage
(973) 779-7800
1234 U.S. 46
Clifton, NJ
StorageMart - Kent Ave & Wallabout
(718) 522-9055
50 Wallabout St
Brooklyn, NY
The Lock Up Storage Centers - Westwood
(201) 666-9770
125 Bergenline Ave
Westwood, NJ
Home Garage
3626 191 Street
Flushing, NY
Treasure Island - Queens
(718) 206-1840
109-09 180th St.
Queens, NY
Secure Self Storage - Wyckoff
(718) 285-6109
1060 Wyckoff Ave
Ridgewood, NY
Storage King USA - Passaic
(973) 473-0100
838 Main Ave
Passaic, NJ
Storage Deluxe - 39-25 21st Street
(877) 989-7867
39-25 21st St
Long Island City, NY
Artex - Exterior Street
26 W 17th St, Ste 801
New York, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade