Festool Circ Saw and Guide Rail System Suffern NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Suffern.

Local Companies

Lackland Self Storage - Wayne
(973) 812-2242
77 Willowbrook Blvd
Wayne, NJ
Safeguard Self Storage - Yonkers - Broadway
(914) 375-0894
188 S Broadway
Yonkers, NY
CubeSmart Self Storage
(973) 779-7800
1234 U.S. 46
Clifton, NJ
A Self Storage of Haledon
(973) 904-0490
400 W Broadway
Haledon, NJ
Hudson Bay Storage
(845) 942-2170
24 Holt Dr
Stony Point, NY
Wallington - Rutherford Self Storage
(201) 355-0364
3 Curie Ave
Wallington, NJ
Safeguard Self Storage - Elmsford - Valley Ave
(914) 592-1198
3-7 Valley Ave
Elmsford, NY
CubeSmart Self Storage
(877) 279-1711
80 S Kensico Ave
White Plains, NY
Storage King USA - Passaic
(973) 473-0100
838 Main Ave
Passaic, NJ
The Lock Up Storage Centers - Westwood
(201) 666-9770
125 Bergenline Ave
Westwood, NJ
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Suffern NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Festool C12 Cordless Drill Suffern NY
- Heavy Lifters Suffern NY
- Drape Wall and Cloak Wall Suffern NY
- Forklift Operation Suffern NY
- Festool Joining System Suffern NY
- FAST Implementation Tips Suffern NY
- Hand-Held Power Saws Suffern NY
- Home Exterior Products Suffern NY
- Home Improvement Tools Suffern NY