Festool Circ Saw and Guide Rail System Rome NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Rome.

Local Companies

Mike's Towing & Recovery
(315) 339-2111
1322 Erie Blvd W
Rome, NY
Discount Plumbing & Heating
(518) 347-0838

Schenectady, NY
E C K Tree & Outdoor Power Products
(315) 492-3837
7000 S Salina St
Nedrow, NY
S & B Mach Wks
(516) 997-2666
111 New York Ave
Westbury, NY
Maxfield Hose Company Inc
(585) 374-9799
8181 Maxfield Rd
Naples, NY
Cagwin Mfg Co Inc
(315) 337-3720
734 S James St
Rome, NY
Sunrise Screw Machine Prods
(845) 735-5020
65 Walter St
Pearl River, NY
National Distribution Inc
(631) 845-4970
130 Schmitt Blvd
Farmingdale, NY
Maryville Hardware Inc
(716) 753-2621
53 S Erie St
Mayville, NY
Woodcutters Headquarters Inc
(716) 542-9839
5271 Crittenden Rd
Akron, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Heavy Lifters Rome NY
Toyota Material Handling now offers a factory-installed compressed natural gas (CNG) fuel system on its 4,000- to 6,500-pound-capacity internal combustion (IC) cushion tire and 3,000- to 6,500-pound-capacity IC pneumatic lift truck models.
- Home Improvement Tools Rome NY
- Hand-Held Power Saws Rome NY
- FAST Implementation Tips Rome NY
- Differences Between Green Globes and LEED Rome NY
- Festool C12 Cordless Drill Rome NY
- Home Exterior Products Rome NY
- Festool Joining System Rome NY
- Forklift Operation Rome NY
- Drape Wall and Cloak Wall Rome NY