Festool Circ Saw and Guide Rail System Richmond Hill NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Richmond Hill.

Local Companies

Treasure Island - Queens
(718) 206-1840
109-09 180th St.
Queens, NY
Secure Self Storage - Zerega
(718) 878-6494
1037 Zerega Ave
Bronx, NY
Safeguard Self Storage - Brooklyn - Empire Blvd
(718) 282-6710
115 Empire Blvd
Brooklyn, NY
The Self Storage Center - Rockville Centre
(516) 255-9100
250 Maple Ave
Rockville Centre, NY
Artex - Exterior Street
26 W 17th St, Ste 801
New York, NY
Metro Self Storage - Bronx
(718) 402-6464
979 Brook Ave
Bronx, NY
Fordham - Storage Post
(718) 329-2202
301 W Fordham Rd
Bronx, NY
Safeguard Self Storage - New Hyde Park - Park Ave
(516) 437-8760
115 New Hyde Park Road
New Hyde Park, NY
Storage Deluxe - 1816 Boston Road
(877) 989-7867
1816 Boston Rd
Bronx, NY
Storage Deluxe - 570 Van Buren Street
(877) 989-7867
1220 Broadway
Brooklyn, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Richmond Hill NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Festool Joining System Richmond Hill NY
- Hand-Held Power Saws Richmond Hill NY
- FAST Implementation Tips Richmond Hill NY
- Heavy Lifters Richmond Hill NY
- Forklift Operation Richmond Hill NY
- Festool C12 Cordless Drill Richmond Hill NY
- Home Improvement Tools Richmond Hill NY
- Drape Wall and Cloak Wall Richmond Hill NY
- Home Exterior Products Richmond Hill NY