Festool Circ Saw and Guide Rail System Port Washington NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Port Washington.

Local Companies

Safeguard Self Storage - Astoria - Astoria Blvd
(718) 726-0648
41-15 Astoria Blvd N
Astoria, NY
Uncle Bob's Self Storage - Stamford - 280 Fairfield Ave
(800) 242-1715
280 Fairfield Ave
Stamford, CT
CubeSmart Self Storage
(718) 456-1666
1125 Wyckoff Ave
Ridgewood, NY
Storage Deluxe - 900 Atlantic Ave
(718) 622-7700
900 Atlantic Ave
Brooklyn, NY
SmartStop Main St
(201) 585-6021
550 Main St
Fort Lee, NJ
Secure Self Storage - West Farms
(718) 878-3826
1725 W Farms Rd
Bronx, NY
CubeSmart Self Storage
(201) 659-0700
1040 Grand Street
Hoboken, NJ
Storage Deluxe - 486 Stanley Ave
(877) 989-7867
486 Stanley Ave
Brooklyn, NY
A Self Storage of Little Ferry
(201) 641-4415
50 Bergen Turnpike
Little Ferry, NJ
StorageMart - River Rd & Ferry Rd
(201) 869-2330
6700 River Rd
West New York, NJ
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Port Washington NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Festool C12 Cordless Drill Port Washington NY
- Forklift Operation Port Washington NY
- Festool Joining System Port Washington NY
- Hand-Held Power Saws Port Washington NY
- Heavy Lifters Port Washington NY
- Home Improvement Tools Port Washington NY
- Home Exterior Products Port Washington NY
- FAST Implementation Tips Port Washington NY
- Drape Wall and Cloak Wall Port Washington NY