Festool Circ Saw and Guide Rail System Port Chester NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Port Chester.

Local Companies

Secure Self Storage - Third Avenue
(718) 577-2543
4268 3rd Ave
Bronx, NY
Safeguard Self Storage - Bronx - Jerome Ave
(718) 293-6450
1253 Jerome Ave
Bronx, NY
CubeSmart Self Storage
(877) 279-1711
80 S Kensico Ave
White Plains, NY
Storage Deluxe - 111 Cedar Street
(877) 989-7867
111 Cedar St
New Rochelle, NY
Storage Deluxe - Southern Blvd
(718) 991-2999
1810 Southern Blvd
Bronx, NY
Webster Ave - Storage Post
(718) 960-4100
4077 Park Ave
Bronx, NY
Safeguard Self Storage - New Hyde Park - Park Ave
(516) 437-8760
115 New Hyde Park Road
New Hyde Park, NY
Safeguard Self Storage - Bronx - Bronx Blvd
(718) 798-3445
4301 Bronx Blvd
Bronx, NY
Storage Deluxe - Bartow Ave
(718) 862-4444
1880 Bartow Ave
Bronx, NY
Storage Deluxe - 1816 Boston Road
(877) 989-7867
1816 Boston Rd
Bronx, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade