Festool Circ Saw and Guide Rail System Oswego NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Oswego.

Local Companies

Scriba Mini Storage
315-343-8402
CO. Rt. 1
oswego, NY
Trihex Mfg Inc
(315) 589-9331
6708 Pound Rd
Williamson, NY
Natl Combustion Co Inc
(718) 291-8400
10411 180th St
Jamaica, NY
Westfield Hardware
(716) 326-2951
7579 E Route 20
Westfield, NY
All American Seamless Gutters
(516) 797-4617

Massapequa, NY
Galizia's All-Safe Storage
315-592-2277
2723 County Rt. 57
Fulton, NY
Cloonan's Air-Cooled Engines
(315) 343-3104
Hall Rd
Oswego, NY
Americas General Contracting
(718) 980-5555
405 Guyon Ave
Staten Island, NY
National Bolt & Nut Co Inc
(516) 561-6400
140 E Mineola Ave
Valley Stream, NY
American Hose & Hydraulics Co
(718) 893-8161
523 Longfellow Ave
Bronx, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade