Festool Circ Saw and Guide Rail System Oneonta NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Oneonta.

Local Companies

Gregory Plumbing & Heating Inc
(607) 433-1848
229 Chestnut St
Oneonta, NY
Trux Outfitter
(607) 441-7303
7352 State Highway 23
Oneonta, NY
Sacandaga Self Storage
(518) 863-2336
RR 30
Northville, NY
Plumbing & Water Sys Dealer Information
(845) 454-3200
4 Liberty St
Poughkeepsie, NY
Fiddler Roofing Inc
(716) 284-1322
2335 Niag Falls Blvd
Niagara Falls, NY
American Storage Systems
607-432-5702
330 Pony Farm Rd
Oneonta, NY
Allied Electric Supl Inc
(607) 433-1005
133 Corporate Dr
Oneonta, NY
Blose Tool Repair
(716) 487-1922

Jamestown, NY
Dattalo Gutters
(585) 342-6320
339 Winona Blvd
Rochester, NY
Tanner Bolt & Nut Corp
(516) 222-2570
4102 Glenwood Rd
Brooklyn, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Festool Joining System Oneonta NY
Festool's Domino isn't just a brand new type of joining tool; it's a whole new joining system. Based on mortise-and-tenon joinery, the Domino combines the qualities of biscuits and dowels with a stronger, self-aligning joint.
- Festool C12 Cordless Drill Oneonta NY
- Home Improvement Tools Oneonta NY
- Drape Wall and Cloak Wall Oneonta NY
- Hand-Held Power Saws Oneonta NY
- Heavy Lifters Oneonta NY
- Home Exterior Products Oneonta NY
- Differences Between Green Globes and LEED Oneonta NY
- Forklift Operation Oneonta NY
- FAST Implementation Tips Oneonta NY