Festool Circ Saw and Guide Rail System Olean NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Olean.

Local Companies

Bisett Building Center/Just Ask Rental
(814) 368-6146
P.O. Box 196
Bradford,, PA
Lighting Seamless Gutter
(914) 576-6693
110 Stonelea Pl
New Rochelle, NY
City True Value
(315) 479-9020
214 S Geddes St
Syracuse, NY
Snobird Company
(315) 437-6310
6385 Thompson Rd
Syracuse, NY
Spruce Glen Equipment
(607) 792-3323
3465 State Route 417
Jasper, NY
Bisett Building Center/Just Ask Rental
(814) 368-6146
P.O. Box 196
Bradford,, PA
Kurz & Zobel Inc
(585) 254-9060
688 Colfax St
Rochester, NY
DO It Best Rental Center
(607) 796-4956
124 N Main St
Horseheads, NY
Mafell North America Inc
(716) 626-9303
435 Lawrence Bell Dr Ste 3
Buffalo, NY
Outdoor Power Parts & Service
(315) 593-6494

Fulton, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade