Festool Circ Saw and Guide Rail System Ogdensburg NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Ogdensburg.

Local Companies

Boyce & Drake
(518) 584-9131
24 1/2 Caroline St
Saratoga Springs, NY
Stevetec Tools
(631) 427-5543
10 Maria Ct
Huntington Station, NY
Davis & Warshow
(914) 666-5127
369 Lexington Ave
Mount Kisco, NY
Crest Automotive Inc
(315) 592-7882
710 W Broadway
Fulton, NY
Hudon's Dan Sales & Service
(315) 896-2217
RR 12
Barneveld, NY
Kaminski & Sons Truck Equipment Inc
(716) 852-1954
245 Lewis St
Buffalo, NY
Robinson Screw Corp
(914) 668-8800
35 N Bond St
Mount Vernon, NY
Suresky Truck Center
(845) 294-8407
224 W Main St
Goshen, NY
Junction Equipment Co Llc
(607) 729-0527
775 Main Retd St
Johnson City, NY
Quatroni & Monahan Plumbing & Heating
(914) 937-2121
153 Highland St
Port Chester, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles