Festool Circ Saw and Guide Rail System Newburgh NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Newburgh.

Local Companies

ACE SELF STORAGE HYDE PARK
(845) 229-6333
1582 Route 9G
Hyde Park, NY
Hampshire Self Storage - Central Valley
(845) 928-1700
27 Bond St
Central Valley, NY
Guardian Self Storage - Highland
(845) 691-2828
50 N Roberts Rd
Highland, NY
Guardian Self Storage - Wappingers Falls - Route 376
(845) 226-8422
929 New York 376
Wappingers Falls, NY
Fort Knox Self Storage - Middletown
(845) 344-1030
9 Canal St
Middletown, NY
ACE SELF STORAGE NEWBURGH
(845) 568-0598
765 South St
Newburgh, NY
Uncle Bob's Self Storage - Monroe
(800) 242-1715
1111 RT-17M
Monroe, NY
Guardian Self Storage - Walden
(845) 778-4222
151 Orange Ave
Walden, NY
Guardian Self Storage - Hyde Park
(845) 229-0330
3914 US-9
Hyde Park, NY
Uncle Bob's Self Storage - Harriman
(800) 242-1715
97 Maher Ln
Harriman, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade