Festool Circ Saw and Guide Rail System Monsey NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Monsey.

Local Companies

Pelham - Storage Post
(914) 633-1901
858 Pelham Pkwy
Mt Vernon, NY
Self Storage Hampshire - Hackensack
(973) 334-0877
260 Railroad Ave
Hackensack, NJ
Safeguard Self Storage - Yonkers - Broadway
(914) 375-0894
188 S Broadway
Yonkers, NY
Storage King USA - Passaic
(973) 473-0100
838 Main Ave
Passaic, NJ
SmartStop Main St
(201) 585-6021
550 Main St
Fort Lee, NJ
Wallington - Rutherford Self Storage
(201) 355-0364
3 Curie Ave
Wallington, NJ
Access Self Storage of Congers
(845) 267-4700
259 N Route 9W
Congers, NY
Safeguard Self Storage - Garfield - Belmont Ave
(973) 546-3809
182 Belmont Ave
Garfield, NJ
CubeSmart Self Storage
(973) 779-7800
1234 U.S. 46
Clifton, NJ
A Self Storage of Haledon
(973) 904-0490
400 W Broadway
Haledon, NJ
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade