Festool Circ Saw and Guide Rail System Massena NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Massena.

Local Companies

Queensbury Seamless Gutters
(518) 745-4356
10 Connecticut Ave
Queensbury, NY
Nassau Corp the
(516) 239-1300
700 Burnside Ave
Inwood, NY
Av Damiano
(315) 735-3443
11430 Bell Hill Rd
Utica, NY
Master Plumbing Heating & Cooling
(516) 365-4646
115 Marine St Ste E
Farmingdale, NY
Long Island Leaf Guard
(631) 277-2331
560 Main St
Islip, NY
Arrow Sales and Rental
(315) 764-7622
217 E Orvis St
Massena, NY
Expert Services
(914) 738-2121
153 Highland St
Port Chester, NY
Frank George Truck Parts
(607) 775-2222

Binghamton, NY
Van Tassel Tool Co
(518) 828-7710
615 Warren St
Hudson, NY
Vanzo Knife Sharpening Service
(914) 277-4183
Warner Dr
Croton Falls, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade