Festool Circ Saw and Guide Rail System Malone NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Malone.

Local Companies

Begor's Seamless Gutters
(518) 483-5950

Malone, NY
Dunrite Gutter's
(716) 754-9194
736 Fairchild Pl
Lewiston, NY
Zo-Air Co Inc
(631) 737-4242
1320 Lincoln Ave Ste 6
Holbrook, NY
Nill Bros Inc
(631) 423-0820
120 W Hills Rd
Huntington Station, NY
H O W Fasteners Inc
(718) 596-2050
60 Franklin Ave
Brooklyn, NY
Suburban Energy Services
(518) 483-0460
E Main
Malone, NY
Snell Equipment
(518) 481-5753
RR 11
Malone, NY
Johnson's Plumbing & Heating Inc
(716) 532-4376
57 Commercial St
Gowanda, NY
Weatherpanel Inc
(716) 992-2440
8551 N Main St
Eden, NY
Swiss Specialties Inc
(631) 567-8800
80B Keyland Ct
Bohemia, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade