Festool Circ Saw and Guide Rail System Jackson Heights NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Jackson Heights.

Local Companies

Secure Self Storage - Third Avenue
(718) 577-2543
4268 3rd Ave
Bronx, NY
Safeguard Self Storage - Hollis
(718) 217-1799
204-02 Jamaica Ave
Hollis, NY
CubeSmart Self Storage
(718) 658-8513
138-54 94Th Avenue
Jamaica, NY
A Self Storage of Little Ferry
(201) 641-4415
50 Bergen Turnpike
Little Ferry, NJ
SmartStop Main St
(201) 585-6021
550 Main St
Fort Lee, NJ
Treasure Island - Redhook
(718) 596-1850
183 Lorraine Street
Brooklyn, NY
Safeguard Self Storage - W Hempstead - Hempstead Turnpike
(516) 538-4511
45 Hempstead Turnpike
West Hempstead, NY
Storage Deluxe - 486 Stanley Ave
(877) 989-7867
486 Stanley Ave
Brooklyn, NY
The Self Storage Center - Rockville Centre
(516) 255-9100
250 Maple Ave
Rockville Centre, NY
Storage America Garden City Park
(516) 294-3377
211 Denton Ave
Garden City Park, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles