Festool Circ Saw and Guide Rail System Horseheads NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Horseheads.

Local Companies

DO It Best Rental Center
(607) 796-4956
124 N Main St
Horseheads, NY
Beam Mack Sales & Svce Inc
(607) 733-4606
3050 Lake Rd
Horseheads, NY
Control Industries Inc
(516) 371-3811
120 Craft Ave
Inwood, NY
Fernando's Seamless Gutters & Leaders
(631) 473-0685
1047 Ava Rd
North Merrick, NY
All Seasons Seamless Gutters Inc
(315) 452-5993
5914 Lathrop Dr
Cicero, NY
Windheim Tool Co Inc
(607) 796-2141
180 Latta Brook Industri
Horseheads, NY
Horseheads DO-It Center
(607) 796-4956
124 N Main St
Horseheads, NY
Cowgill Peter W & Margy
(585) 235-5700
235 Mount Read Blvd
Rochester, NY
Eppy's Tool & Equip Warehouse
(718) 434-7878
809 E 42nd St
Brooklyn, NY
Advanced Recovery Inc
(845) 858-8809
41 Mechanic St
Port Jervis, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade