Festool Circ Saw and Guide Rail System Fredonia NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Fredonia.

Local Companies

Angus Theriault & Sons Inc
(914) 698-2086
323 Ward Ave
Mamaroneck, NY
Shako Inc
(716) 876-6152
2266 Niagara St
Buffalo, NY
Farrant Screw Machine Prods Inc
(585) 457-3213
Gulf Rd
Java Village, NY
Service Plumbing Edward S Eksterowicz
(518) 372-8449
963 Emmett St
Schenectady, NY
Silver Fox Gutters
(845) 255-0574
52 S Manheim Blvd
New Paltz, NY
Monte's Small Engine
(716) 679-3138
3405 S Roberts Rd
Fredonia, NY
Merrick Screw & Supply
(718) 894-4991
5663 Melvina Pl
Maspeth, NY
Dynamite Tool Co Inc
(631) 563-8181
1551 Smithtown Ave
Bohemia, NY
W D Wiltsey Decker Equip Co Inc
(518) 371-4980
144 Harris Rd
Waterford, NY
Unicell Body Co
(585) 424-2660
1319 Brghtn Hnrtta Twn
Rochester, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Heavy Lifters Fredonia NY
Toyota Material Handling now offers a factory-installed compressed natural gas (CNG) fuel system on its 4,000- to 6,500-pound-capacity internal combustion (IC) cushion tire and 3,000- to 6,500-pound-capacity IC pneumatic lift truck models.
- Differences Between Green Globes and LEED Fredonia NY
- Forklift Operation Fredonia NY
- Drape Wall and Cloak Wall Fredonia NY
- Festool Joining System Fredonia NY
- Home Exterior Products Fredonia NY
- Festool C12 Cordless Drill Fredonia NY
- Home Improvement Tools Fredonia NY
- Hand-Held Power Saws Fredonia NY
- FAST Implementation Tips Fredonia NY