Festool Circ Saw and Guide Rail System Elmira NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Elmira.

Local Companies

Cornell Stephen J
(607) 733-5949
603 S Main St
Elmira, NY
Home Energy Contractors
(607) 732-5383
11 Palisades Blvd
Elmira, NY
Pearson Seamless Gutters
(607) 724-0063

Elmira, NY
Maspeth Roofing
(718) 639-2200
5369 69th St
Maspeth, NY
B & N Industries
(516) 623-1440
111 Albany Ave
Freeport, NY
X-tra Storage
(607) 565-3810
802 N Lehigh Ave
Sayre, PA
Jonsereds Olympic Chains Sales & Svce
(607) 733-5949
603 S Main St
Elmira, NY
Aci Supply Co
(607) 733-7171
736 Baldwin St
Elmira, NY
R W Mulligan Co Inc
(631) 734-2200
246 W Main St
Riverhead, NY
Westchester Valve & Fitting Co Inc
(914) 762-6600
2345 Route 52
Hopewell Junction, NY
Data Provided by:
  

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Forklift Operation Elmira NY
Lumberyards across the country use NLBMDA's award-winning forklift training program to see how they measure up with OSHA's standards. The program can help you guarantee that you meet forklift safety requirements.
- Differences Between Green Globes and LEED Elmira NY
- Festool C12 Cordless Drill Elmira NY
- FAST Implementation Tips Elmira NY
- Hand-Held Power Saws Elmira NY
- Home Improvement Tools Elmira NY
- Heavy Lifters Elmira NY
- Festool Joining System Elmira NY
- Drape Wall and Cloak Wall Elmira NY
- Home Exterior Products Elmira NY