Festool Circ Saw and Guide Rail System Dunkirk NY

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site in Dunkirk.

Local Companies

Automasters Paint & Body Works
(716) 366-2414
10935 Bennett Rd
Dunkirk, NY
Niagara Gutters
(716) 695-3500
3448 Niagara Falls Blvd
North Tonawanda, NY
Chase Machine & Manufacturing Co
(585) 427-2520
175 Clay Rd
Rochester, NY
Helix Inc
(585) 589-7078
14109 State Route 31
Albion, NY
Frontier Fasteners Inc
(716) 835-3000
4324 Bailey Ave
Buffalo, NY
Casale Plumbing & Heating
(716) 366-1700
829 Brigham Rd
Dunkirk, NY
Dewalt
(585) 424-1310
2969 W Henrietta Rd
Rochester, NY
B & N Industries
(718) 343-9550
111 Albany Ave
Freeport, NY
Braun Brown & Braun Ltd
(516) 752-0196
23 Heisser Ct
Farmingdale, NY
Regional Home Improvement Inc
(518) 864-5989
Hillman Rd
Delanson, NY

Provided By:

Source: TOOLS OF THE TRADE Magazine
Publication date: July 16, 2007

By Joe Youcha

I'm always tremendously skeptical about a tool that claims to "change how work is done" as Festool does for its plunge-cutting 8-1/4-inch, 13-amp TS 75 EQ circular saw system. But after testing the TS 75 EQ, the company's newest and largest saw, I believe every word of it.

The TS 75 EQ excels at making precise straight cuts. It's not a framing saw, and it doesn't pretend to be; but this precise saw and guide will change the way you make long clean cuts on site. At the heart of the system is its aluminum guide rail that the saw base fits onto with zero play. A rubber strip along the guide's edge is cut to a perfect fit with the saw's first use and thereafter serves as an exact, splinter-free cut line–where you lay the edge is where you get your cut. The guide rail doesn't have to be clamped down; grippy material underneath holds it in place. Guide rails are available in eight lengths from 32 inches to 16 feet, 5 inches and also can be connected together.

Another major difference of the TS 75 EQ is its plunge-cutting action. The guard stays in place while the motor and blade descend to a preset depth stop–adjustable in 1-millimeter increments or as small as .1 millimeters with the addition of a set screw–before being pushed forward. This allows the saw to cut in the middle of a workpiece.

Click here to read full article from Tools of the Trade

Related Articles
- Differences Between Green Globes and LEED Dunkirk NY
Both standards cover similar grounds, such as site sustainability, energy efficiency, water efficiency, resource efficiency, and indoor environmental quality. They have four possible levels of certification, require third-party certification, and have a minimum amount of points that builders must attain in each section. Different builders may adopt either of these standards.
- Drape Wall and Cloak Wall Dunkirk NY
- Festool C12 Cordless Drill Dunkirk NY
- Home Exterior Products Dunkirk NY
- Festool Joining System Dunkirk NY
- FAST Implementation Tips Dunkirk NY
- Hand-Held Power Saws Dunkirk NY
- Forklift Operation Dunkirk NY
- Heavy Lifters Dunkirk NY
- Home Improvement Tools Dunkirk NY